How To Tune a Violin

You can tune a violin with a stand alone tuner like the one below

But there are also other ways to tune a violin

Knowing how to tune a violin should be important to all violin players. Violins are tuned in perfect fifths (a musical interval spanning seven semitones or five staff positions in written notation). Each string on a violin is a perfect fifth apart. From the left hand side of the fingerboard (assuming you are looking toward the neck from the chin rest on a normally set up violin), the strings are arranged in the following order: G, D, A, E. Beginners may find it easier to use an electronic tuner to help tune up but it is strongly advisable to be able to tune by ear as well.To more about best mandolin brands and best violin brands reviews.

How To Tune A Violin By Ear

Learning to tune a violin by ear helps familiarize you with the sound of the instrument and the way an instrument tuned in fifths sounds. You become used to the sound and will be able to tell when a string is out of tune quickly if you learn by ear – if you rely solely on electronic tuners it will likely take you longer to notice when you are not in tune. Learning to tune a violin by ear will help your pitch. Nonetheless, you still should have an electronic tuner as a reference for use when there is no other musician or instrument to provide a reference note.Read more about how to buy a violin .

It is generally easier to tune a violin if it has fine tuners (tuners on the tailpiece). You can use the pegs to get coarsely in tune and then use the fine tuners to narrow in on the correct pitch. Use the pegs to tune up just below the note and then use the fine tuners to bring the note into pitch. Always tune up to a note rather than tuning down to the note. If you tune too high you may run the risk of breaking a string, so it is always better to start with the string a bit slack. Some violins only have fine tuners on the “E” string (the one that is most easily broken), and while some classical purists may not like the idea, I recommend you have fine tuners on all strings.To check more how to buy a piano.

If you are tuning up a new instrument or using new strings, you will likely find that the strings stretch over time and initially it may be a bit more difficult to keep the instrument in tune and you will need to re-tune frequently. Don’t worry, as the strings settle your instrument will stay in tune longer.To get printable piano chart chord

Generally, people use an “A” note as a reference (440Hz). You can use an “A” from another musician (piano, guitar, another violin, or any other instrument). To tune by ear from a reference “A” tone, while playing the “D” and “A” strings together, tune the “D” string up until you hear the sound of perfect fifth (you will get used to this over time). It sometimes helps to use your fourth finger on the lower string (“D” in this case) as it will correspond to the note on the adjacent string (“A” in this case). Once you have your “A” and “D” strings in tune, use “D” as your reference to bring the “G” string into tune, finally, use your “A” once again to bring the “E” string into tune.To read more about best student  violin buying guide reviews.

I do recommend that you purchase an electronic tuner for those times when you need to tune a violin and you are not tuning to another player. They are quite inexpensive and come in either stand alone type models or clip on models. I personally prefer the clip on models as they are not influenced as strongly by noise around you.The stand alone tuners use a small microphone to pick up the sound and if you are in a room where there is a lot of noise or a lot of other people tuning, a stand alone tuner may have difficulty picking up your note. A clip on tuner uses the resonance in the instrument itself by picking up the vibrations through the instrument directly and can be used in a noisy environment.To read more about best flute brands buying guide reviews.

You can tune a violin with a clip on tuner

Tuning for beginner

Beginner should know how to tune a violin

  • Each of the violin strings is tuned to what is called ‘perfect fiths’. Or 5 whole notes up from the lower string. Starting with G (just below middle C), then D, A, E. Hear the sounds of each note (click on the notes below)To more about best electric violin reviews.

Hear G

Hear D

Hear A

Hear E

  • You should always tune from below the note to prevent strings from breaking.
  • Use the fine tuners as whenever possible. When they become wound down, loosen them right the way up, use the peg to tighten the string to just below the note, and use the fine tuners to tune the note up.
  • Tune the A string first, followed by D, G then E strings as this is how orchestral players tune their violins.
  • Many beginning violinists find it helpful to use a digital tuner to tune their violin, and some models detect and display when the note being tuned matches the desired pitch.To read more click here about  how to play violin.

Write a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.